manualshive.com logo in svg

Janssen F Series, Руководство по эксплуатации, Страница: 176 / 315

Поделиться
Скачать
Janssen F Series Скачать руководство пользователя страница 176

174

14.5 Sensor faults

9) The sheet sensors 
    do not detect the 
    baking sheet.

1) The distance between the sensor 
    and the sheet is too great. Either 
    the sensors are not optimally 
    adjusted or your baking sheets are 
    strongly deformed (crooked).

2) The sensor is defective. You can 
    check this by holding a metallic 
    object against the sensor. The 
    sensor should light up yellow when 
    it comes into contact with metal. 
    If this is not the case, the sensor is 
    most likely defective and must be 
    replaced.

1) Reduce the distance between the sheet 
   sensor and the sheet. You can easily 
   adjust the height of the sensor.

2) Replace the defective sensor.

Содержание F Series




























































































































































































































































































































Отзывы:

Нет отзывов