Janssen F Series, Руководство по эксплуатации

Страница: 257 / 315

29
Cross-section-view A-A:
The axis of the forming roller is not parallel to the axis of
the kneading roller!
Absolutely necessary activity/procedure:
The forming roller adapters must be mounted as intended
and must have an accurate form fit:
1) Forming roller adapters for K250 forming rollers of the
K series have adapters with bolts on both sides.
The bolts must not be removed under any circumstances
and must have a tight fit in both the forming roller adapter
and the forming roller!
!
!
!
The holes (Ø25 mm) in the K250 forming roller must not
be too deep, otherwise there is a risk that the bolts will
slip in too deep and there will no longer be a connection to
the hole in the forming roller flange.
If this is not the case, a new F-series forming roller
should be created.