36
IB-P02F-P-FT
IB-P02F-P-FT
IB-P02F-P-FT
Signal input to SensorAlarm A / SensorAlarm B
Signal output from RemoteOUT1 / RemoteOUT2
IB-P02F-P-FT
Signal output from RemoteOUT1
IB-P02F-P-FT
Stop signal output from RemoteOUT1
Signal input to SensorAlarm A
No signal input to SensorAlarm B
IB-P02F-P-FT
No signal input to SensorAlarm A
Signal input to SensorAlarm B
Preparing reception (teaching) complete
Start teaching
＊
The initial position is for roller transfer.
Run the roller transfer MDR
Stop running the roller transfer MDR
(loading complete)
Start to switch to the carrier wheel surface
Switching to the carrier wheel surface complete
IB-P02F-P-FT
Signal output from RemoteOUT2
IB-P02F-P-FT
Stop signal output from RemoteOUT2
IB-P02F-P-FT
Signal input to SensorAlarm A
No signal input to SensorAlarm B
Start to switch to the roller surface
Switching to the roller surface (preparing reception)
complete
Area sensor for loading
ON
→
OFF
Run the carrier wheel transfer MDR
Stop running the carrier wheel transfer MDR
(loading comple)
Area sensor for discharge
ON
→
OFF
6.
Control/Operation
F-RAT-NX75 Annex User Manual for IB-P02F-P-FT
Basic operation
Operation image
Turn on the power
Set the initial position
of the transfer surface
（
Teaching
）
Load
Switch the transfer surface
to the diverting direction
（
Roller transfer Carrier wheel transfer
）
Discharge
Prepare reception
（
Transfer surface switch
）
（
Carrier wheel transfer Roller transfer
）
Advanced preparation
Product check
Wiring
Maintenance/Inspection
Appendix
IB-P02F-P-FT settings
Control/Operation
Original notice - U1.1
