25
Setting the IP address
↓
Creating the project file
↓
Registering IB-P02F-P-FT to be used
↓
IB-P02F-P-FT property settings
↓
Writing properties
Complete
↓
Creating the IB-P02F-P-FT ladder logic
↓
Writing the ladder logic
↓
Property setting
Selected Node
The IP address for the IB of for which the properties are being specified is displayed.
Double-click Node on the ‘(3) Node tree window’ to switch the selected Node.
Logic selection
Select the ladder logic to be written to IB-P02F-P-FT.
Node tree window
Set the master or slave for IB-P02F-P-FT registered in the project.
Property main window
Write/read buttons to IB-P02F-P-FT
Property setting window
Settings related to motor control
How to release error and driver cards communications settings
Settings for motor's acceleration / deceleration
Ladder logic timer value settings
Ladder logic count value settings
Ladder logic count value settings
Motor
Error/Network
Acceleration/Deceleration
Timer
Counter
Pulse Counter
Reads the property settings from IB-P02F-P-FT.
Writes the property settings.
Writes the ladder logic.
Maintains the changed property settings, and closes the property setting window.
Writes the ladder logic and property settings to multiple controllers.
Without maintaining the changed property settings, closes the property setting window.
Reads the ladder logic from IB-P02F-P-FT.
Writes the ladder logic for reading together when executing ‘LogicDL’ with its checkbox
selected.
Read
Write
Logic DnL
OK
ALL
Cancel
Logic UpL
Logic backup
5. IB-P02F-P-FT settings
F-RAT-NX75 Annex User Manual for IB-P02F-P-FT
1
2
3
4
5
Advanced preparation
Product check
Wiring
Control/Operation
Maintenance/Inspection
Appendix
IB-P02F-P-FT settings
Original notice - U1.1
①
Selected Node
②
Logic selection
⑤
Write/read buttons to IB-P02F-P-FT
③
Node tree window
④
Property main window
