27
Write the property settings to IB-P02F-P-FT.
Specified properties cannot be applied until they have been written.
4
Press “Write”.
When writing is successful, the “Write Completed Successfully” message is displayed.
1
This completes the property settings.
1
■
Before writing, make sure that IB-P Series is set to IB-P02xxFT, and
Motor Current Limit is set to MA:7.0A / MB:4.0A.
■
When switching the rotation direction during transfer (during MDR rotation), the F-RAT
will stop for 0.5 seconds, and then the transfer direction will be switched.
About the transfer direction
Set the transfer direction with the ladder logic command and ‘Direction’ under properties.
For details on the ladder logic, refer to “ICEP” user manual, chapter 4 “Create ladder logic”.
Reference)
F-RAT transfer direction
For details and other settings, refer to the «ICEP» user manual.
V-ribbed pulley
M1
：
Carrier wheel transfer
CW
CCW
M2
：
Roller transfer
CW
CCW
5. IB-P02F-P-FT settings
F-RAT-NX75 Annex User Manual for IB-P02F-P-FT
Setting the IP address
↓
Creating the project file
↓
Registering IB-P02F-P-FT to be used
↓
IB-P02F-P-FT property settings
↓
Writing properties
Complete
↓
Creating the IB-P02F-P-FT ladder logic
↓
Writing the ladder logic
↓
Property setting
Advanced preparation
Product check
Wiring
Control/Operation
Maintenance/Inspection
Appendix
IB-P02F-P-FT settings
Original notice - U1.1
