50
The error status for the controller selected in is displayed.
The error status for the selected controller is displayed in Motor Error List.
Error items for axes where errors occur will turn red.
2
2
Use ICEP to check error status, and release errors manually.
Checking error status
7-2.
Checking and releasing
errors
Error monitor
Select ‘Dialog’ - ‘Error Information’ from the main menu.
1
Select the IP Address for the PC used to open ICEP, and click ‘OK‘.
2
The Error Information window is displayed as shown below.
The current error status on the IB-P are displayed on this window.
3
Error Information window
Whether or not errors occur on the connected controller is displayed collectively.
“No Error” is displayed for the MDR where no error occurs, “Error” for the MDR where an error
occurs, and “-” for IBs that have not been connected.
1
The IP address for the selected controller is displayed.
To specify other controllers, click an optional IP address on
①
to switch to the controller with the
selected IP address.
3
■
To release an error on HBM-201, use RemoteOUT on IB-P02F-P-FT.
(Refer to HBM-201 error details)
Click
Select
7.
Maintenance/Inspection
F-RAT-NX75 Annex User Manual for IB-P02F-P-FT
Advanced preparation
Product check
Wiring
Maintenance/Inspection
Appendix
IB-P02F-P-FT settings
Control/Operation
Original notice - U1.1
