22
Setting the IP address
↓
Creating the project file
↓
Registering IB-P02F-P-FT to be used
↓
IB-P02F-P-FT property settings
↓
Writing properties
Complete
↓
Creating the IB-P02F-P-FT ladder logic
↓
Writing the ladder logic
↓
■
Do not use the same IP address used for other devices, such as
IB-P02F-P-FT.
Setting preparation
Check connection between the PC and IB-P02F-P-FT.
4
Start ICEP, and select “Dialog” - “Discovery” from the main menu.
1
Set the IP address for the PC you are using under ‘IP Address‘, and click ‘Discovery‘.
2
Select the current network (‘192.168.1.xx’) under ‘Select Network’.
Nodes for which the connection has been confirmed will be shown under ‘Network Status’.
3
Set the IP address to “192.168.1.XXX”, and Subnet mask to “255.255.255.0”. Click
“OK”.
3
When changing the network address and gateway address, refer to "ICEP" user manual, chapter 9
"Other functions" section 6 "Dialog".
IP address
192.168.1.XXX
Subnet mask
255.255.255.0
Default gateway
192.168.1.254
5. IB-P02F-P-FT settings
F-RAT-NX75 Annex User Manual for IB-P02F-P-FT
■
If the IP address for the PC you are using is not displayed, the PC has not
been connected to IB-P02F-P-FT.
Re-check the LAN cable and IP address for the PC.
Click
Advanced preparation
Product check
Wiring
Control/Operation
Maintenance/Inspection
Appendix
IB-P02F-P-FT settings
Original notice - U1.1
