30
Start ICEP, and select “File” - “Open” from the main menu. Then, open the
project file that has been created in 5.1 Setting preparation.
(For details on creation of the project file, refer to 5 IB-P02F-P-FT settings
(P.21), and the “ICEP” user manual, chapter 2 “Initial setting” section 2
"creating/reading project"
Create the F-RAT ladder logic to be written to IB-P02F-P-FT.
Creating the IB-P02F-P-FT ladder logic
1
Project tree window
Select ‘Program’ to display the ladder logic on the program window.
Select ‘Device List’ to display the contact and relay lists on the program window.
Comments can be added to contacts and relays from the lists. Also, the contact and
relay status will be displayed during monitoring.
Select ‘Information’ to display the logic name, ladder logic’s writer name, ladder
creation date and time, ladder build date and time, and ladder logic size.
Program window
A window for creating the ladder logic, etc.
Various icons
Use various icons to describe the ladder logic.
Ladder logic window
Creating the ladder logic
6.
Control/Operation
6-1.
Creating the ladder logic
1
2
3
Ladder logic
Term
A program (ladder logic) to define each motor operation for the IB.
The program can be created with the PC application ICEP by Itoh
(Itoh Configurator for Ethernet/IP and PROFINET ).
Click
Click
F-RAT-NX75 Annex User Manual for IB-P02F-P-FT
Setting the IP address
↓
Creating the project file
↓
Registering IB-P02F-P-FT to be used
↓
IB-P02F-P-FT property settings
↓
Writing properties
Complete
↓
Creating the IB-P02F-P-FT ladder logic
↓
Writing the ladder logic
↓
Advanced preparation
Product check
Wiring
Maintenance/Inspection
Appendix
IB-P02F-P-FT settings
Control/Operation
Original notice - U1.1
Click
