Italtherm CITY GLASS 20 FR Скачать руководство пользователя страница 5

Страница: 5 / 50

Green Heating Technology

User warnings

Important

In case of gas smell:

1 - do not press electrical switches, use the telephone or other objects that can provoke

sparks;

2 - open immediately the windows and the doors in order to cleanse the room air;

3 -

close the gas supply taps;

4 - call a qualified technician.

Do not obstruct the ventilation openings

of the gas boiler room, in order to avoid possible

dangerous situations as the creation of poisonous or explosive mixtures.

First starting up and Use

The first starting up and the maintenance of the boiler must be performed by a professionally

qualified staff (for example the installer or the Service Centres authorized by ITALTHERM)

The latter will check that:

the label technical data of the gas boiler correspond to those of the gas available;

the main burner regulation is compatible with the gas boiler output;

the chimney works correctly, expelling the combustion products;

the air supply and the combustion products evacuation work correctly, in accordance with the re-

quirements in force;

the conditions for a correct ventilation are guaranteed, also when the gas boiler is located inside a

closed space (with suitable caracteristics).

This boiler is factory set to be supplied with Natural Gas G20 (Methane). It can be converted,

always by a qualified technician and using original spare parts, to operate with LPG (G30/G31)

�

The User must not touch sealed items nor break the seals. Only specialized technicians and the

official technical service can break the seals of sealed items.

The boiler is fitted with safety devices that block operation the case of problems with the boiler

or related systems. These devices must never be disabled: if a device intervenes frequently,

have a qualified technician located the cause, even in systems to which the boiler is connected,

and in the flue intake/outlet system that must be efficient and made according to the laws in

force (see examples in paragraph "Flue systems" on page 22). If a boiler component has failed,

you must only use original replacement parts

When the boiler is off for a long period see the Paragraph "Boiler inactivity" on page 11 for

the necessary precautions about the electrical supply, the gas supply and the protection against

freezing.

Do not touch the heated surfaces

of the boiler, as the doors, the flue, the chimney pipe, etc.,

also after the boiler operation because, for a certain time, these surfaces are overheated.

Any

contact with them can cause dangerous scalds.

It is then forbidden to let children or inexperi

enced people be close to the boiler, during its operation.

Do not expose the wall hung gas boiler to water or other liquids sprinklings, or to vapours directly

coming from gas cookers/hobs.

Do not obstruct the air intake or flue outlet terminals, even momentarily or partially.

Содержание CITY GLASS 20 FR



















































Результаты поиска

Содержание CITY GLASS 20 FR

Отзывы:

Похожие инструкции для CITY GLASS 20 FR

Бренды по названию

Популярные бренды

Italtherm CITY GLASS 20 FR, Инструкция по эксплуатации

Результаты поиска

Содержание CITY GLASS 20 FR

Отзывы:

Похожие инструкции для CITY GLASS 20 FR

Бренды по названию

Популярные бренды