Italtherm CITY GLASS 20 FR Скачать руководство пользователя страница 28

Страница: 28 / 50

Green Heating Technology

Param

eter

Adj. range

(fact. set.)

and values

Description

0…15

(3)

Value in minutes. Delay of boiler re-ignition after set Central Heating tem-

perature has been reached.

(This parameter works only if par. 05 = 0)

0…3

(0)

Auxiliary maintenance functions

Disabled

- normal operation of the boiler

(Remember to set this value to 0 at the end of work)

function Bleeding on heating side

- boiler puts 3-way valve on the heating

side and pump is continuously powered

function Bleeding on DHW side

- boiler puts 3-way valve on the DHW side

and pump is continuously powered

function Bleeding both Heating and DHW side

- boiler cyclically moves the

3-way valve on heating and DHW sides, and pump is continuously powered

Remark:

Auxiliary maintenance functions stay active for about 15 minutes, then the parameter is automatically set

back to 0. To stop the function manually, set the value to 0 or quit the Technical Menu.

0…2

(1)

Primary circuit working temperatures during DHW demand

dynamics

- Do not use in this type of boiler

(only for models with flow meter instead of flow switch)

fixed

- burner OFF at 75°C and burner ON at 65°C

linked

to DHW SET: Burner OFF when DHW tempe 3 ° C and burner

ON when DHW tempe 2 ° C

0…2

(0)

Chimney-sweeper” function: burner ignition, not modulated, to allow the

combustion check. For deeper details see paragraph "Combustion test" on

page 29.

burner off - normal boiler work

(rimember to reset this parameter to value 0)

burner ignition at

maximum output

burner ignition at

minimum output

Remark:

During this phase, the delay between burner ignitions is zero, so if flow temperature is close to maximum,

frequent re-ignitions of the burner could take place.

0; 30…60

(0)

DHW temperature (storage preparation)

By user controls

- The adjustment of the DHW temperature is allowed to the

User, by means of the knob

30…60

User controls disabled

- If there is some reason to disable the knob

, and

disallow the user to set the DHW temperature, choose a value different from

0 that will correspond to the set temperature.

0…10

(3)

Temperature hysteresis (°C) for storage preparation. It determinates how

many degrees has the DHW temperature to decrease compared to the set

one, to generate a preparation request.

5…15

(8)

Differential (°C) for max flow temperature.

Содержание CITY GLASS 20 FR



















































Результаты поиска

Содержание CITY GLASS 20 FR

Отзывы:

Похожие инструкции для CITY GLASS 20 FR

Бренды по названию

Популярные бренды

Italtherm CITY GLASS 20 FR, Инструкция по эксплуатации

Результаты поиска

Содержание CITY GLASS 20 FR

Отзывы:

Похожие инструкции для CITY GLASS 20 FR

Бренды по названию

Популярные бренды