Italtherm CITY GLASS 20 FR Скачать руководство пользователя страница 13

Страница: 13 / 50

Green Heating Technology

“Ambient Anti-Frost” Function

Note:

if you want to use the “Ambient Anti-Frost” function that is often available in common room

thermostats or chronothermostats, it is necessary

NOT to leave the boiler in

mode

but in

a mode that allows the heating, e.g. Heating Only mode

(that saves from useless heating of

the DHW storage, although keeping its anti-freeze function active)

or in Winter

mode.

The “Ambient Anti-Frost” function does not protect the sanitary circuit outside the boiler and,

especially, in areas where the heating system doesn’t reach. For this reason, we recommend

that you empty the cold and hot sanitary water, including the DHW storage, from the parts of

the system that are at risk of freezing.

Installation

Law and regulation prescriptions for the installer

Always comply with national and/or local regulation about BOILER INSTALLATION.

Always comply with national and/or local regulation about WORK SAFETY of Personnel in

charge of installation.

Characteristics of the room:

as this boiler has an heat output lower than 35 kW (about 30000 Kcal/h),

it is not required to install the appliance in a dedicated room, provided that the room complies with

the regulation in force and that all installation rules assuring a safe and regular gas boiler operation,

are strictly respected�

Permanent ventilation of the installation room is mandatory and extremely important

when

a boiler with air draught from the installation room (B… appliance type) is installed. Ventilation

must be made and sized in compliance with Laws and Rules in force.

Presence of other appliances:

the presence of other appliances (especially if they interfere with the

boiler draught) can be forbidden by the regulation in force or can require modifications (e.g. the

enlargement of the ventilation opening or the making of new ones).

Instructing the user:

at the end of the installation, the installer must:

• explain the operation of the boiler and its safety devices to the user;

• give this user this booklet and the documentation within his/her competence, duly filled in where

required.

Содержание CITY GLASS 20 FR



















































Результаты поиска

Содержание CITY GLASS 20 FR

Отзывы:

Похожие инструкции для CITY GLASS 20 FR

Бренды по названию

Популярные бренды

Italtherm CITY GLASS 20 FR, Инструкция по эксплуатации

Результаты поиска

Содержание CITY GLASS 20 FR

Отзывы:

Похожие инструкции для CITY GLASS 20 FR

Бренды по названию

Популярные бренды