Isotra HRS-ZIP, Техническое руководство

Страница: 153 / 154

153
SCREEN BLINDS
2. ASSEMBLY
Take the assembly only according to this manual which will help you to avoid unnecessary assembly errors or other incon-
veniences associated with them.
TOOLS FOR ASSEMBLY: • CORDLESS DRILL • SCREWDRIVER PH 2 • KNIFE, SCISSORS, PLIERS
Check: • Before assembly we recommend checking all parts of the delivered goods, which will eliminate potential pro
-
blems. Any short comings or comments concerning the assembly or custom blinds please advise to manufacturers. • Remo
-
ve all obstacles from the skylight, which could hinder the installation.
ASSEMBLY:

Open the roof window into position so that the assembly from the exterior can be run out

If the window is equipped with a locking bolt at the attachment of the upper box blinds, remove these screws (If it is not
equipped with a locking bolt, continue with next point).

When the roof window is in the bottom wing and is provided through the belay bolts flashing, put them out

Attach the top box blinds securing the top edge flashings and center to center of window

Screw box of roller blind over plastic washer into the upper window frame plating (types of windows with a locking bolt
removed, use only those holes for attachment)

Place mats to cover plastic pads
FIXATION OF BOTTOM HOOK:

If the window is equipped with a locking bolt at the attachment of the upper box blinds, remove these screws

If the roof windows not provided by these screws, measure the pitch of holes at the bottom part of roller blind

Transfer this pitch on flashing wings depending on the axis of the window

Screw the hooks through plastic backing

Place mats to cover plastic pads
FINISHING:

Open the roof window to its maximal position and fix the bottom rail of roller blind to bottom hooks

The roller blind will be pulled down automatically when closing the window

The roller blind is prepared to its usage