Isotra HRS-ZIP, Техническое руководство

Страница: 114 / 154

SCREEN BLINDS
114
Assembly to ceiling
Mark the position of holes to be drilled, considering the following factors:
- for upper boxes having the width of max. 4.0 m, two brackets are sufficient which must be installed in a distance
of approximately 15–20 cm from each end;
- for wider roller blinds, four brackets (two pairs) are necessary, one in a distance of 15–20 cm from each end and
the second in a distance of 50–60 cm from the first one;
- if possible, the distance from the wall depends on the bracket attachment method, i.e. the position of wedges:
- front wedge: 52 mm
- rear wedge: 100 mm
The following facts must be kept in mind:
- assembly of a bracket with wedges pointing toward the room minimises the distance between the upper box and
the rear wall, but the bracket is visible and not visually attractive;
- assembly of a bracket with wedges in the back is more aesthetically desirable, but requires at least 5 cm of space
between the back wall and the upper box.
Attach brackets (6) using screws
and components suitable for the
type of structure onto which they
are to be attached (metallic structu-
re, window frame, wall, other ma-
terial). If three or more brackets are
used, ensure that the brackets are
perfectly aligned ± 1 mm; this can
be checked by sliding the box along
the cut-outs before tightening the
attachment screws.
Insert the upper box to the brackets and slide it lengthwise until it is centred within the window wing, and secure with
wedges (7).
SCREEN ZIP
Assembly to ceiling