Isotra HRS-ZIP, Техническое руководство

Страница: 142 / 154

142
SCREEN BLINDS
SCREEN LITE
Measurement Manual
Measurement Manual
The SCREEN LITE roller blinds can be placed into an opening or in front of it, and attached to the ceiling or wall.
The screen roller blind width and height shall be measured as follows:
W ..... width (mm)
a) attachment into an opening:
Measure the actual opening width in three points, indicate the lowest dimension measured in the order form.
b) attachment in front of an opening:
As a rule, indicate the width of the opening which is to be shaded in the order form.
Dimensions outside the stipulated limits must be consulted with the manufacturer.
H ..... height (mm)
Measure the overall height including the roller blind upper section and holder.
Dimensions outside the stipulated limits must also be consulted with the manufacturer.
V
Š
75 - Klika
60 - Motor
110
120
53
min 1-2
20
19
40 - Motor
60 - Klika
Š
V
120
33
11
110
40 - Motor
60 - Handle
H
W
W
75 - Handle
60 - Motor
H
Assembly
Assembly works must be carried out solely by qualified personnel capable of adhering to all instructions stated below with
full consideration of their safety and that of all other persons.
The main activities include:
1) preparation of walls, ceilings, windows or other structures for the installation of roller blinds while using portable drills and
screwdrivers;
2) roller blind assembly to a wall or ceiling;
3) connection to power mains;
4) adjustment (of end stops / end switches, etc.) and testing of the roller blind.
Preparation of roller blind assembly
Prior to installing the roller blind, check whether the surface of the assembly place is not damaged and if it is suitable for
installation. Select suitable attachment screws (type and dimensions) corresponding to the type of structure onto which the
roller blind is to be installed (wood, cement, brick).
NOTE: Faulty installation can lead to accidents. Observe instructions for the proper roller blind assembly to prevent the risk
of separation of the roller blind from a wall or window. ISOTRA a. s. shall not be held responsible for defects caused by faulty
assembly.