Isotra HRS-ZIP, Техническое руководство

Страница: 107 / 154

SCREEN BLINDS
107
2-00849-0010-B
10 10
10
10
10
10
10
10
10
10
10
10
10
10
20
30
40
50
60
10
74
72
70
71
10
90
120
130
140
110
30
ZP0046
ZP0047
ZP 0023
ZP 0016
A 700/22
A 67/12
ZP0001
ZP 0024
A 67/12
RR 08/5
ZP0052/1 XY 00017
A 710/3
A 700/12
ZP0030/1
ZP0057/1
ZP0031/1
ZP0058
ZP0058/1
ZP0042
ZP0042/1
A 700/3
MR 024/1
MR 035
ZP 0012
ZP 0018
ZP0005
ZP 0037
ZP0019
ZP 0015
ZP 0014
20
ZP 0017
73
80
ZP0025/1
81
SCREEN ZIP
Basic Product Specification
The limited dimensions of height of roller blind for different types of fabrics in mm
Satiné Satiné Blackout Screen Nature Satiné Metal SCR 3005 Soltis 92 Cristal plus 500 3S
thickness mm 0,75 mm 0,75 mm 0,20 mm 0,75 mm 0,55 mm 0,45 mm 0,50 mm
weight g/m 2 520 g 660 g 170 g 520 g 410 g 420 g 610 g
motor 3000 3000 - 3000 - 3000 3000
Control
Used for lifting and lowering of screen blinds.
Motor - Optional control using the sun / wind sensor or by a remote control or switch.
Handle - the control rod mechanism is led into the interior at an angle from 45 ° to 90 ° using a wall bushing and a hexago-
nalrod. (Color: gray / eloxal coating)
Specification
Head Rail
Bottom Rail
Side Guidance
Installation
Box Box Winding roller Guide Rail
Commercial Name C 105 CT 105 MR 024/1 FZ 47 GS40 into the ceiling
(into the window opening
on the wall
(in front of the window
opening)
Dimension
(mm)
103x116,5 104,5x116,5 Ø 78 mm 20x47,4 40x42,2
Material Al Al Fe Al Al
Colour
Standard:
RAL 9006 light silver
RAL 9007 dark silver
RAL 9010 white RAL 7016 anthracite grey
RAL 7016S anthracite grey structure
RAL 8014 brown
Other RAL colors upon request*
*except of plastic parts, maximum width 4000 mm
We do not make atypical designs.
Standard Dimensions
Version Width (mm) Height (mm) Guaranteed area (m 2 )
min max min max max.
motor 800 4500 500 3000 13,5
handle 500 4500 500 3000 13,5
Fabrics of the Blackout type:
The opaque layer is located on the side of the window for each type of installation. In the case of outdoor installation,
strong winds can cause a slight lifting of the base slat and fabric and therefore 100% blackout cannot always be guaran-
teed. In the case of Blackout fabrics, the zippers are fastened on the face side and not on the opaque layer, so it is possible
that under strong wind or oblique view of the guide rail a piece of cloth from the zipper tape can be seen, but this is of little
importance compared to tightness of the fabric (reducing the waves).
Common phenomena of technical fabrics
The fabric may curl around the welds or in the middle of the fabric, it is the so-called tree effect. This phenomenon is co-
mmon because different forces act on the fabric during use. Another phenomenon may be visible bruises on the fabric
caused by the roller. These disappear at higher temperatures when the fabric levels.