Isotra HRS-ZIP, Техническое руководство

Страница: 100 / 154

SCREEN BLINDS
100
The complete wide 1040 guide rails are made up of a base section (C), a front section (D) and a holder (B) with zipper pro-
file (A), and at the bottom of the base section of each guide rail an aluminium end cap. The front section is fixed into the
base section of the guide rail by the drilling screw (see figure). The holder and the zipper profile can only be inserted when
the front section is fixed. This is because the holder and the zipper profile are 35 mm longer than the guide rail.
The base and front section are extruded aluminium profiles, both of which have a layer of powder coating. The holder and
the zipper profile are both made of plastic.
If you want to fit an insect screen between the screen and the window, then adjustment click profiles need to be placed on
the box and the guide rail.
To attach the HR10-ZIP, first the basic elements must be secured to the window frame with the necessary accuracy (see
installation instructions!). A number of screws are supplied with each guide rail.
If selecting option of click profile, then the clip profiles are secured to the bottom with an end cap, using these screws. The
basic elements can then be clipped onto it.
The screen box is then placed on the guide rails, with the pivots in the guide rails.
Control
The HR10-ZIP integral screen is always viewed along the INSIDE (see figure).
The HR10-ZIP screen is always electrically operated. The operating side can be either on the left or on the rights. On the
selected operating side there is the choice to have the cable run along the lateral guide or through a hole to be drilled in
the top or back of the box profile (see figure).
The motors have an execution time of approx. 4 minutes, after that they go into thermal security mode (see motor manual).
E C
D
OPTIE 2656 : clipsprofiel
B
A
E C
D
OPTIE 2656 : clipsprofiel
B
A
RAAM-ZIJDE
D
C
B
A
D
C
B
A
(A) Zipper profile & leaf springs
(B) Holder for zipper profile glissiere
(C) Base section guide rail 1040
(D) Front section
(E) Drilling screw 4,2 x 9,5 mm
Guide rail 1040 (6-015203)
LINKS
RECHTS
BUITEN
BINNEN
A
E H
B
K
A
E H
B
K
click profile
window
side
left
right
outside
inside
right
left