SCREEN BLINDS
26
Step 2: Drilling the holes for the guide rails
Guide rails A839, A829:
Indicate holes to be drilled to the wall or another assembly surface.
Use predrilled guide rails to do this.
A – holes for attaching the guide rails (see Fig. below).
B – holes for the holders (see Fig. below).
through hole of the guide rail
for holders
through hole of the guide rail
4 mm
A
A
B
7
A
B
B
A
7
Attach the holders to the assembly surface.
Guide rails A830, A820:
To attach the guide rails A830, A820, use predrilled holes in the rails.
Guide rails A838, 828:
Step 3: Sliding the guide rails on the side piece pins
Place the roller blind box on the cardboard packaging
(take care not to damage the surface treatment).
Then slide the predrilled guide rails to the side piece
pins.
Make sure whether the bottom slat end pieces fit pr-
operly in the guide rail slots and whether the fabric
zipper fits in the plastic insert in the bottom slat.
Содержание HRS-ZIP
Страница 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Страница 3: ...SCREEN BLINDS 3 CE Product Marking...
Страница 4: ...SCREEN BLINDS 4...