Isotra HRS-ZIP, Техническое руководство

Страница: 104 / 154

SCREEN BLINDS
104
Please note that only the click profile should be screwed on to the window. The base is then fitted to the adjus-
tment profile using a click connection.
Fig. 12
Please note that there is a hole in the
bottom of the adjustment profile. Place
the supplied end cap here, between the
screw and the profile. Tighten everything
to the window with screws.
Guide rail 1040 – click profile
Use the same surface mounting of the guide rail on the window as for guide rail 1120. This guide rail is supplied with pre-as-
sembled mounting. Clip the guide rail onto the adjustment profile (after it has been fixed to the window)!
Fig.1 6
Please note that a small hole has been
applied to the underside of the adjustment
profile. Position the supplied end cap here,
between the screw and the profile. Tighten
everything to the window with screws.
Fig.15
Please note that a small hole has been
applied to the underside of the adjustment
profile. Position the supplied end cap here,
between the screw and the profile. Tighten
everything to the window with screws.