Isotra HRS-ZIP, Техническое руководство

Страница: 24 / 154

SCREEN BLINDS
24
Step 3: Drilling the holes for the guide rails
Guide rails A839, A829:
Indicate holes to be drilled to the wall or another assembly sur-
face.
Use predrilled guide rails to do this.
A – holes for attaching the guide rails (see Fig. below).
B – holes for the holders (see Fig. below).
through hole of the guide rail
for holders
through hole of the guide rail
4 mm
A
A
B
7
A
B
B
A
7
Guide rails A830, A820:
To attach the guide rails A830, A820, use predrilled holes in the rails.
Guide rails A838, A828:
Step 4: Installing the guide rails
Guide rails A839, A829:
1. Attach the holders to the assembly surface.
2. Click the guide rails to the holders head-on.
3. Slide the guide rails to the side piece pins and make sure whether the bottom slat end pieces fit properly in the guide
rail slots and whether the fabric zipper fits in the plastic insert in the bottom slat.
4. Attach the guide rails to the assembly surface through holes A.
Guide rails A830, A820, A838, A828:
Slid the guide rails on the side piece pins and attach them to the assembly surface through holes A.