![background image](http://html1.mh-extra.com/html/isotra/hrs-zip/hrs-zip_technical-manual_2093697115.webp)
SCREEN BLINDS
115
Assembly to wall
Mark the position of angle-section brackets and holes to be drilled. For upper boxes having the width of max. 1.5 m, two
brackets are sufficient, which must be installed in a distance of approximately 15–20 cm from each end. For wider roller
blinds, four brackets (two pairs) are necessary, one in a distance of 15–20 cm from each end and the second in a distance of
50–60 cm from the first one.
Assembly holes must be placed at least 25 and 50 mm from
the ceiling or any obstacle exceeding the box. Attach brac-
kets using screws and components suitable for the type
of structure onto which they are to be attached (metallic
structure, window frame, wall, other material). If four brac-
kets are used, ensure that the brackets are perfectly aligned
± 1 mm; this can be checked by sliding the box along the
cut-outs before tightening the attachment screws. Install
the box to brackets and slide it lengthwise until it is centred
within the window wing.
SCREEN ZIP
Assembly to wall
Содержание HRS-ZIP
Страница 1: ...TECHNICAL MANUAL SCREEN BLINDS EN...
Страница 3: ...SCREEN BLINDS 3 CE Product Marking...
Страница 4: ...SCREEN BLINDS 4...