Isotra HRS-ZIP, Техническое руководство

Страница: 89 / 154

SCREEN BLINDS
89
4 mm
A
A
B
7
A
B
A
A
B
B
A
A
B
B
max. 1500 see fig. 4 p. 6
x
7
METHOD 2:
Place the complete box / guide rail assembly in or against the window opening and screw them in place.
through hole chamber
of guide rail
for clips
through hole chamber
of guide rail
Box type X
70 37
90 53
110 73
150 114
Step 1: Drilling holes for the mounting brac-
kets and guide rails
Mark the holes to be drilled on the wall or on
the mounting surface (use the pre-drilled lateral
guide rails for this purpose).
(If supplied, affix the box mounting bracket(s)
first.)
Drill the holes in the wall (Ø6 mm) or in the win-
dow frame (Ø3.2 mm).
For installation to the wall, insert S6 plugs into
the holes.
Affix the clips to the mounting surface.
spirit level
Step 2: Sliding the guide rails over the conso-
le pivots on the bottom of the box
Place the screen box on the cardboard pac-
kaging (take care not to damage the paint fi-
nish).
Next slide the pre-drilled guide rails onto the
console pivots on each of the side consoles.