Isotra HRS-ZIP, Техническое руководство

Страница: 27 / 154

SCREEN BLINDS
27
Step 4: Fitting the box and guide rails
Lift the box with the guide rails. Do this in cooperation with at
least two other persons depending on the overall box width.
Place the complete assembly to the window opening.
Caution! Make sure not to break off
the pins by sliding the guide rails too
forward, backward, or sideward.
Step 5: Attaching the box to the wall/ceiling holders, and attaching the guide rails
1. Fit the box to the wall/ceiling holders.
2. Make sure the box is correctly fitted to all holders.
3. Fit and push the safety locks; they must click to correct position.
4. For guide rails A839, 829: click them to the holders head-on and attach to the assembly surface through holes A.
5. For guide rails A830, 820, A838, A828: attach them to the assembly surface through holes A.
Step 6: Checking the assembly
1. Always make sure the roller blind is properly installed:
2. First, check horizontality of the box.
3. Check whether both guide rails are parallel to one ano-
ther and, at the same time, perpendicular to the box.
Measure and compare the diagonals accurate to millimetres.
If the box and guide rails are not installed correctly, the
bottom slat will wind into the box at an angle, causing the
fabric to crinkle.