background image

Installation Guide for 

Faux Wood Blinds

1

Fitting the Brackets

The brackets can be fitted in three different ways:

Face Fix

Top Fix

Side Fix

Face Fix

Top Fix

Blinds with a larger width come supplied with center support brackets. These need to be aligned with the top of the box (side) brackets. Install 

them with the bigger flap situated at the top and space them equally along the width of the blind making sure they are clear of any cords 

coming out of the headrail. They can be both face-fixed or top-fixed.

Содержание Faux Wood Blinds

Страница 1: ...p Fix Blinds with a larger width come supplied with center support brackets These need to be aligned with the top of the box side brackets Install them with the bigger flap situated at the top and space them equally along the width of the blind making sure they are clear of any cords coming out of the headrail They can be both face fixed or top fixed ...

Страница 2: ...and push it into position If your blind has been supplied with valance returns slide the valance return clip into the valance Slot the other end of the valance clip onto the valance return and push them together until the edges align Handy Tip If you pull on the cords to tilt rotate the slats and they do not move Firstly make sure the slats are in the fully open position and the two tilt cords are...

Страница 3: ...pening of one half of the condenser next place the remaining loose cord into the opening in the other half then press the cord condenser together until it is fully closed Cord Safety Cleat The safety cleat needs to be installed as close as possible to the headrail and in all cases not less than 1500mm from the floor The cords must be fully wrapped around the safety cleat s when the blind is not in...

Страница 4: ...duct is maintenance free however we do recommend that regular visual checks are completed to ensure that no components have been damaged which could result in operating difficulties and or cause a safety risk Also follow the guidelines below to ensure the blind remains in good working order 1 When opening or closing the blind only raise or lower it when the slats are in the horizontal open positio...

Отзывы: