Date: 05/01/2019
Tel: 800-677-5264 | Fax: 888-526-4329
R. Lang Company
Installation
Page 1 of 5
ROLL
AWAY
®
Series 4000
Installation Instructions
(Window Screen)
IMPORTANT:
REVIEW ALL INSTRUCTIONS
THOROUGHLY
BEFORE STARTING STEP 1
TOOLS REQUIRED:
• Tape
Measure
•
Phillips Head Screwdriver
•
Drill Motor & 3/32” Drill Bit
•
Pencil or Scriber
• File
• Scissors
• Utility
Knife
• Level
Step 1
PARTS INCLUDED:
Verify Part Lengths Required
R2040 guides should measure the opening height minus 1 15/16”.
The completed canopy assembly should measure the opening width minus 1/16”.
Partially
Assembled Unit
Flat Head Screw
#6 x 3/4”
R4060 & R4070 left and right
Guide Locks
With R4280 magnets installed
R2040 with
Meshlock
TM
Installed
Note: The Mesh Lock
TM
can obscure the guide locks and canopy
end cap guide runners. A 1” wide, 8” long piece of thin cardboard
folded in the middle can be inserted into the guide channel to make
the bottom of the channel visible.
