23
Step 13:
Cut one end of the other two smoke dome top big,
part 13, components at an angle parallel to the opposite
end of the piece. The bottom length of the cut piece should
measure 35 3/4”. (Figure 51)
Step 14:
Place one modified smoke dome top big pieces
(haunch cut off and a bottom length of 49 3/4” together with
one of the smoke dome top big pieces that was angle cut to
35 3/4” bottom length and parallel angle) together on the
damper support and flush with the back wall of the firebox
so that the two smoke dome pieces meet along their field
modified cut line. (Figure 52)
The overall length of the two joined smoke dome
pieces should be 85 1/2”.
Step 15:
Repeat Step 14 on the front damper support. Set
the front smoke dome components 2-3/4” back from the
front face of the front damper support. (Figure 53)
Step 16:
Fit the top sloping smoke dome side wall
components, part 34, in place between the front and back
smoke dome arrangements at each end of the smoke dome.
(Figure 54)
Step 17:
Place one of the four modified smoke dome top big
pieces (haunch cut off and 49 3/4” bottom length) on top of
and flush with the first tier of smoke dome components at
the back of the first course of smoke dome.
The haunched, un-cut end of this piece should be
flush with the haunch end of the first tier smoke dome below
it. (Figure 55)
The overall length of the two joined smoke dome
pieces should be 73 1/4”.
Step 18:
Repeat this arrangement at the front of the smoke
dome.
Step 19:
Cut each of the two smoke dome top medium
pieces, part # 11 at an angle cut that is parallel to the un-cut
end and so that its bottom length is 25 1/2”. (Figure 57)
Step 20:
Place one of the angle cut smoke dome top medium
pieces at the front and one at the back of the first tier smoke
dome so that they meet the smoke dome top large (haunch
cut off and 49 3/4” bottom length) already set in Steps 14
and 15.
The overall width dimension at the top of the
smoke dome should be 64 1/2”. (Figure 58)
Step 21:
Fit the top sloping smoke dome side wall
components, part 34, in place between the front and back
smoke dome arrangements at each end of the smoke dome.
(Figure 59)
Assembly Instructions - 86072-72 cont.
FIGURE 53
DISCAR
D
25 1/2”
DISCAR
D
49 3/4”
2 3/4”
# 11
75 1/4”
#13
#13
#13
#13
64 ½”
# 11
#13
#13
#13
FIGURE 54
FIGURE 55
FIGURE 56
FIGURE 57
FIGURE 58
Содержание Magnum 86072-60
Страница 2: ......
Страница 40: ...40 DM Chimney System Lateral Support cont FIGURE 81 FIGURE 82 ...
Страница 55: ...55 Notes ...
