B
B
A
D
C
A
FRAMED OP'G.
MINIMUM
FRAMED OPENING
2'-5 1/2"
11
Rough Framing Dimensions
Corner Location Layout
Rough Framing Dimensions
Model
Width
Height
Depth
A
B
C
Model 60
76.5”
87.5”
29.5”
Model 72
88.5”
87.5”
29.5”
Notes:
A. “B” includes the Magnum 86072” 3” thick base plate. “B” is reduced
by 3” if the base plate is eliminated to create a “flush hearth”.
B. “Raised hearth” requires additional rough opening height at “B”
equal to the height of the raised hearth detail.
C. Rough framing dimension for width “A” allows for the required
1-1/2” clearance at the sides of the Magnum 86072 Series fireplace.
D. Rough framing dimension for depth allows for the required 1-1/2”
clearance at the back of the Magnum 86072 Series fireplace.
The following chart of dimensions is intended to aid in the positioning of
an Magnum 86072 Series 86072 fireplace in a corner condition
where the DM chimney must turn 45° degrees to align with overhead
framing.
Firebox
A
B
C
D
Model 60
73 1/2” 39”
53 1/2”
102 1/2”
Model 72
85 1/2” 45”
62”
111”
To turn flue 45°, first set one offset block on the firebox so that
the chimney offsets 3” toward the back of the firebox. (Figure 5)
Set a DM outer casing onto this offset block so that the outer
casing is at 45° to the firebox and square to the overhead framing system.
Run the vertical DM chimney through the overhead framing.
More offset blocks can be used - if necessary to align with
overhead framing - before running the vertical DM chimney outer casing
and liner.
Note:
Support the third offset down to footings and at each third offset
block thereafter.
FIGURE 4
FIGURE 5
Содержание Magnum 86072-60
Страница 2: ......
Страница 40: ...40 DM Chimney System Lateral Support cont FIGURE 81 FIGURE 82 ...
Страница 55: ...55 Notes ...
