Technical Documentation
opti-check
v2.8.2-K11
64/332
ipf electronic GmbH
Lüdenscheid, Germany
The following table explains the meaning of various settings for features and values.
Parameters
Meaning
Feature
Value
Time
Image acquisition Provides the time of the image acquisition in milliseconds since the
device was switched on.
Result
Result
Total result
Partial result
If this selection is activated, the total result or the partial result of the
job is transferred.
Result (2 characters):
1. Characters: "P" or "F" for a Pass or Fail result
2. Characters: "A" or space for "Alarm triggered" or "No alarm
triggered".
Result (1 character):
"P" or "F" for a Pass or Fail result
"I" if the partial result was not output during the job
Statistics
Statistics
Total result
Partial result
If this option is activated, the statistics for the result are included. The
total number of images, the number of OK images and the number of
images for the total result that triggered an alarm are all transferred,
with the individual values separated with a separator.
Trigger
Additional data
trigger
If this selection is activated, the string transferred via the TD command
is mirrored back as a control option.
Trigger
Image counter
If this selection is activated, a 16 bit wide counter (0-65535) is used.
This increases by 1 with each image acquired and resets to 0 once it
reaches 65535.
NOTE
Following the descriptions of the individual feature checks, there is a table containing the
values which can be output via the process interface.
Содержание opti-check
Страница 1: ...Technical Documentation opti check...
