ipf electronic opti-check, Техническая документация инструкция

Страница: 42 / 332

Technical Documentation
opti-check
v2.8.2-K11
42/332 ipf electronic GmbH
Lüdenscheid, Germany
(device dependant)
Click on
Configure external illumination…
to make the settings for a connected external illumination system
or a flash controller.
(device dependant)
You can choose between two resolutions for the device, for the reduced resolution, additional profiles
optimised for speed or brightness are available:
NOTE
The reduced setting will always detect 2 x 2 pixels and only one in four pixels will be read
out. By using the "Reduced, max. speed" setting, the image acquisition time is reduced.
By using the "Reduced, max. brightness" setting, a much brighter image can be acquired
with the same length of exposure.
This is particularly useful with fast moving objects. Choose the mode in which the feature
to be checked appears most clearly. Due to the smaller image size, image processing will
generally be faster in both cases.
With the illumination settings, you can switch off the internal illumination and possibly activate external
illumination with the
Flash sync output . If you wish to use the external Flash sync output , this must be
chosen accordingly in the Digital I/O menu. You can also activate both type of illumination.
The Flash Sync Signal is located parallel to the exposure time on the digital I/Os. The exception to this is the
4-pin connection on devices with interchangeable lenses. Here the signal is available at a maximum of 1
metre per second if the operating mode
Activate external flash controller (max. 1 ms) is selected.