ipf electronic opti-check, Техническая документация инструкция

Страница: 187 / 332

Technical Documentation
opti-check
v2.8.2-K11
187/332 ipf electronic GmbH
Lüdenscheid, Germany

Now select Add on the colour palette to teach in the first target colour to be counted.

In the next step, mark the first target colour to be added on the image. This target colour can be
located in any part of the image area and does not have to be in the detection area. However, only
target colours in the defined detection area are counted. The marked target colours are displayed
with a hatched pattern in the detection area.

You can add up to 8 target colours to the colour palette. With Add (auto) , an area is automatically
suggested for you to add as a new colour. Move the suggested area to the desired area and adjust
its size if necessary.
3D>>: Here you can see where the defined colours are in a CIELab colour coordinate system. Unlike
the CIELab colour coordinate system on the Colour parameters tab, the complete colour area is
displayed and is not limited to 50 values per axis. The current target colour is marked with a grid.
Only colour areas that do not overlap can be definitively detected.