INVT GD350-004G-2-UL, Руководство по эксплуатации

Страница: 34 / 366

Goodrive350-UL Series VFD Installation guidelines
-28-
Terminal
220V≤15kW
460V ≤30kW
220V≥18.5kW
Function 460V≥37kW
575V
R, S, T Power input of the main circuit
3-phase AC input terminals which are
generally connected with the power
supply.
U, V, W VFD output
3-phase AC output terminals which are
generally connected with the motor.
P1 / DC reactor terminal 1
P1 and (+) are connected with the
terminals of DC reactor.
(+) and (-) are connected with the
terminals of braking unit.
PB and (+) are connected with the
terminals of braking resistor.
(+)
Braking resistor
1
DC reactor terminal 2,
braking unit terminal 1
(-) / Braking unit terminal 2
PB
Braking
resistor 2
/
PE
460V: the grounding resistor is less than
10Ohm
Protective grounding terminals, every
machine is provided 2 PE terminals as
the standard configuration. These
terminals should be grounded with
proper techniques.
A1 and A2 Control power supply terminal
Optional parts (external 220V control
power supply)
Note:
1. Do not use asymmetrical motor cable. If there is a symmetrical grounding conductor in the motor
cable besides the conductive shielded layer, ground the grounding conductor on the VFD end
and motor end.
2. Brake resistor, brake unit and DC reactor are optional parts.
3. Route the motor cable, input power cable and control cables separately.
4. If the terminal description is "/", the machine does not provide the terminal as the external
terminal.
4.3.3 Wiring process of the main circuit terminals
1. Connect the grounding line of the input power cable to the grounding terminal (PE) of the VFD,
and connect the 3PH input cable to R, S and T terminals and tighten up.
2. Connect the grounding line of the motor cable to the grounding terminal of the VFD, and connect
3PH motor cable to U, V and W terminals and tighten up.
3. Connect the brake resistor which carries cables to the designated position.
4. Fix all the cables outside the VFD mechanically if allowed.