INVT GD350-004G-2-UL, Руководство по эксплуатации

Страница: 333 / 366

Goodrive350-UL Series VFD Technical data
-327-
B.5 Application standards
The following table describes the standards that the VFDs comply with.
EN/ISO 13849-1:2008
Safety of machinery––Safety-related parts of control systems––Part
1: General principles for design
IEC/EN 60204-1:2006
Safety of machinery––Electrical equipment of machines. Part 1:
General requirements
IEC/EN 62061:2005
Safety of machinery––Safety-related functional safety of electrical,
electronic, and programmable electronic control systems
IEC/EN 61800-3:2004
Adjustable speed electrical power drive systems––Part 3:EMC
requirements and specific test methods
IEC/EN
61800-5-1:2007
Adjustable speed electrical power drive systems––Part 5-1: Safety
requirements—Electrical, thermal and energy
IEC/EN
61800-5-2:2007
Adjustable speed electrical power drive systems––Part 5-2: Safety
requirements––Function
C22.2 No. 274-13 Adjustable-speed drives, 1st edition.
UL 508C
Power conversion equipment, 3
rd
edition
GB/T 30844.1-2014
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 1: Technical conditions
GB/T 30844.2-2014
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 2: Test methods
GB/T 30844.3-2017
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 3: Safety regulations
B.5.1 CE marking
The CE marking on the name plate of a VFD indicates that the VFD is CE-compliant, meeting the
regulations of the European low-voltage directive (2006/95/EC) and EMC directive (2004/108/EC).
B.5.2 UL and CUL marking
The UL and CUL markings are attached to the VFD, indicating that the VFD follows the provisions of
UL508C and C22.2 No. 274-13.
B.5.3 EMC compliance declaration
European union (EU) stipulates that the electric and electrical devices sold in Europe cannot generate
electromagnetic disturbance that exceeds the limits stipulated in related standards, and can work
properly in environments with certain electromagnetic interference. The EMC product standard (EN
61800-3:2004) describes the EMC standards and specific test methods for adjustable speed
electrical power drive systems. Products must strictly follow these EMC regulations.
B.6 EMC regulations
The EMC product standard (EN 61800-3:2004) describes the EMC requirements on VFDs.
Application environment categories
Category I: Civilian environments, including application scenarios where VFDs are directly connected
to the civil power supply low-voltage grids without intermediate transformers