Intel SRCU32 - RAID Controller, Руководство пользователя

Страница: 107 / 182

Storage Console 107
View Status/Defects
Table 17. View Status/Defects
Status/Defects Description
Grown Defects Number of media defects that have occurred in addition to the media defects the hard
drive had upon delivery. See Figure 46.
Primary Defects Number of media defects that the hard drive had upon delivery.
Last Status The Last Status gives detailed information on the last failure of a hard drive. The
information is only present until the next hard reset of the system and may help for
deeper failure analysis or tracing.
Figure 46. View Status/Defects
De-Initialize Disk
WARNING
This option destroys all data on the hard disk.
This menu option allows you to de-initialize a hard drive which has previously been initialized for
use with the Intel RAID Controller SRCU32. By doing so, the specific Intel RAID Controller
SRCU32 information present on the device is removed. Obviously, the de-initialization cannot
restore data that was lost during initialization.
Lock/Unlock Disk
This option is only highlighted when you have selected a removable hard drive (for example,
SyQuest
†
, Iomega
†
). Before you can initialize a cartridge you must lock it. Before removing it you
must unlock it.
Enclosure Status
After selecting this option you can either view the Enclosure Status or view/configure the enclosure
slots. Before you can use the auto hot plug with a SAF-TE subsystem, you must configure the
subsystem (more precisely its intelligence, the so-called SEP SAF-TE Enclosure Processor). See
Figure 47.
✏
NOTE
Non-initialized disks cannot be configured as no RAID configuration information can be stored on
these disks.