BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 2.0.2
6421 Congress Ave.
11/20/2012
Boca Raton, FL 33487
+1 (561) 989-0006
216 of 265
in trigger mode, the user can add a strobe pulse associated with
rising edge of the trigger pulse.
Standard Strobe:
Controls the strobe position and pulse duration for Strobe 1 and
Strobe 2. The user can set the individual strobe position relative
to the beginning of the frame, via the slider or by entering the
desired value. The strobe pulse duration can be set for each
strobe individually. The user can set the strobe position and
duration within the camera frame period with 1 us resolution.
Trigger Strobe
: Sets the duration and delay of a strobe sync pulse (with respect to
the trigger pulse) sent to the camera output. The user can set the
strobe duration and the delay from 0 to 16777215 us.
5.7.9 Color
This window sets the gain and offset for the primary R G B colors. Available only
for B0610C, B1410C, and B1610C cameras. In addition this window sets the White
balance mode and displays the calculated white balance coefficients – Figure 5.18.
This window will be disables for the Mono cameras.
White Balance:
Sets the White balance mode of operation.
1.
“Off” – No white balance is performed.
2.
“Once” – the camera analyzes only one image frame,
calculates only one set correction coefficients, and all
subsequent frames are corrected with this set of coefficients.
3.
“Auto” – the camera analyzes every frame, a set of correction
coefficients are derived for each frame and applied to the
next frame.
4.
“Manual” – the camera uses the correction coefficients as
entered from the user.
Manual WBC:
User enters manually the white balance coefficients for each
color. The range is from 0 to 4095 (255 is equal to 1.0x). The
user has option to set all coefficients to “Zero”.
Statistic:
Displays the current (calculated) white balance coefficients per
color.
RGB Gain:
The user can set individually the desired digital gain for each
primary color R G B (1.0x to 4.0x, 0.001x increment) via the
slider or by entering the desired value. The user has option to set
all gains to “Unity” (1.0x)
