BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 2.0.2
6421 Congress Ave.
11/20/2012
Boca Raton, FL 33487
+1 (561) 989-0006
213 of 265
9.
Vertical Bars – displays a set of 8 vertical gray bars with
different gray levels.
Figure 5.15 – Test image window
Superimposed:
This mode superimposes a test pattern over live image (not
available during H & V binning):
1. Crosshair – superimposes a cross, located in the center of the
CCD images. A small cross will appear in the gray square window.
2. H&V Lines – superimposes a pair of H and/or V lines. Dual
sliders are available to select the horizontal and vertical position of
the lines. Each line location will be visible in the gray square
window. The sliders range from 1 to the maximum number of
pixels/lines available on the sensor.
3. Brightness – sets the brightness of the crosshair and H&V lines,
ranges from 0 to 4095.
4. Scale – provides the ability to measure distance between the
lines in pixels or in linear units. The uses must enter a scale
calibration value.
5.7.7 Area of Interest (AOI)
AOI is used to select one or more regions of interest. A total of seven independent
AOIs can be generated, and the user can select the size of each horizontal and
vertical window. Horizontal and Vertical binning is also available to change the H
and V resolution of the image – Figure 5.16.
Window:
This sets the portion of the image, which will be displayed and used:
