BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 2.0.2
6421 Congress Ave.
11/20/2012
Boca Raton, FL 33487
+1 (561) 989-0006
253 of 265
Figure E.3
CAUTION NOTE
It is strongly recommended that you DO NOT USE any other communication software to
upgrade the camera FW, RGS, DPC, HPC, FFC and LUT files.
If the user selects to upgrade camera firmware (.RPD file) and camera factory register
space (.RGS file), the camera firmware (.RPD) must be upgraded first.
During camera RGS or FW upgrade the camera power must be on all the time, and the
process must not be interrupted. If the camera is disconnected or the process canceled, this
will result in a user application firmware corruption. If such event occurs start the upload
process again until completion. If the upgrade process cannot be completed, the camera
will power with the default Factory Firmware so you can start the upgrade process again. If
you need more information, please contact Imperx.