BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 2.0.6
6421 Congress Ave.
11/20/2012
Boca Raton, FL 33487
+1 (561) 989-0006
125 of 265
-
“
2 Tap Interleaved
” – In this mode all pixels are sent to two outputs (Tap 1 and
Tap2) in the following sequence – Figure 2.24b. Each pixel can be 8, 10 or 12
deep (14 bit output is not available in this mode).
Tap 1 – starting (for every line) with the pixel 1 and then all odd pixels in a
sequence (1, 3 … L-3, L-1) until reaches the one before last pixel.
Tap 2 – starting (for every line) with the pixel 2 and then all even pixels in a
sequence (2, 4 …L-2, L) until reaches the last pixel for the line.
...
P(L-3)
Tap 1
...
P(L-2)
P(L-1)
P(L)
P(1)
P(2)
P(3)
P(4)
Tap 2
Figure 2.24b – 2 tap interleaved output
C.
Quad Output Cameras
For the quad output cameras (B6640 and B3340) there are two options available - 2
Tap Interleaved or 4 Tap Interleaved
-
“
2 Tap Interleaved
” – In this mode all pixels are sent to two outputs (Tap 1 and
Tap2) with 2x clock in the following sequence – Figure 2.24c. Each pixel can be
8, 10 or 12 deep. This mode is available only for the normal speed.
Tap 1 – starting (for every line) with the pixel 1 and then all odd pixels in a
sequence (1, 3 … L-3, L-1) until reaches the one before last pixel.
Tap 2 – starting (for every line) with the pixel 2 and then all even pixels in a
sequence (2, 4 …L-2, L) until reaches the last pixel for the line.
...
P(L-3)
Tap 1
...
P(L-2)
P(L-1)
P(L)
P(1)
P(2)
P(3)
P(4)
Tap 2
Figure 2.24c – 2 tap interleaved output
-
“
4 Tap Interleaved
” – In this mode all pixels are sent to four outputs (Tap 1,
Tap2, Tap3, tap4) with 1x clock in the following sequence – Figure 2.24d. Each
pixel can be 8, 10 or 12 deep. This mode is available for bot Normal and
Overclock modes.
Tap 1 – starting (for every line) with the pixel 1 and then all pixels in a sequence
(1, 5, 9 … L-7, L-3)
Tap 2 – starting (for every line) with the pixel 2 and then all pixels in a sequence
(2, 6, 10 …L-6, L-2)
Tap 3 – starting (for every line) with the pixel 3 and then all pixels in a sequence
(3, 7, 11 … L-5, L-1)
Tap 4 – starting (for every line) with the pixel 4 and then all pixels in a sequence
(4, 8, 12 …L-4, L)
