BOBCAT Hardware User’s Manual
Imperx, Inc.
Rev. 2.0.2
6421 Congress Ave.
11/20/2012
Boca Raton, FL 33487
+1 (561) 989-0006
260 of 265
F-3 IP Engine Install
From DOS prompt navigate to the folder where the IGV file is located then run the
installer using the IGV file then a space and use parameter –n followed by the serial
number of the camera xxxxxx.
Make sure you have the correct IP Engine for the camera model IGV xxxx.exe application.
Use the file name IGVxxxx.exe –n123456 (need a space between the .exe
and the -n)
This loads the serial number back into the camera.
Select the IP engine file and click OK.
After successful completion of the update close the window and power cycle the
camera.
CAUTION NOTE
It is strongly recommended that you DO NOT USE any other communication software
to upgrade the camera FW, RGS, DPC, HPC, FFC and LUT files.
If the user selects to upgrade camera firmware and camera factory register space, the
camera firmware must be upgraded first.
