manualshive.com logo in svg

Impediment RS-1600-X24, Руководство пользователя, Страница: 68 / 256

Поделиться
Скачать
Impediment RS-1600-X24 Скачать руководство пользователя страница 68

RS-1600-X24 User Guide

50

5.12 Viewing and Restoring Default 

Settings

You can view and restore all of the X24 Subsystem’s default settings.

5.12.1 Viewing Default Settings

You can view the X24 Subsystem’s default settings as well as the current settings.

To view the default settings:

 

• From SAM, select 

Manage X24 Subsystem > Utilities > Configuration Utilities

.

The 

Show Changed Settings 

page displays.

5.12.2 Restoring Default Settings

You may want to do this if the X24 Subsystem is not working properly and you cannot determine why. 
This lets you then change the settings that are critical to your configuration.

You can also view all of your current settings and a compare them to the default settings.

Restore Defaults does not affect any settings related to arrays or partitions. This restores all configuration 
settings except: 

• Management (CAPI) LUN
• IP settings (addresses, subnet mask, and gateway)
• Device port link speeds

To see a list of the current settings and the default settings, click the blue 

See Restore Default Changes

 

text.

To restore the default settings:

1

From SAM, select 

Manage X24 Subsystem > General Config > Restore Defaults

.

The 

Restore Defaults 

page displays.

2

Click 

Restore Defaults

.

You must restart the X24 Subsystem for the change to take effect.

3

Select 

Shutdown/Restart

 from the SAM menu.

Содержание RS-1600-X24

































































































































































































































































Отзывы:

Нет отзывов