Impediment RS-1600-X24 Скачать руководство пользователя страница 40

Страница: 40 / 256

RS-1600-X24 User Guide

Note

You cannot reset the queue depth value. It always reflects the current I/O queue depth.

To reset all statistics:

From SAM, select

Monitor X24 Subsystem > Statistics > Reset All Statistics

The Reset All Statistics page displays.

Click

Reset Statistics

The system confirms that you want to make the change.

3.3.2 Verifying an Array

The Verify function allows you to verify the data on redundant arrays (RAID 1, RAID 3, RAID 4, RAID 5,
RAID 10, and RAID 50):

• RAID 3, RAID 4, RAID 5, and RAID 50: Verifies all parity blocks in the selected array and corrects

any bad parity.

• RAID 1 and RAID 10: Compares the primary and secondary drives. If a mismatch occurs, the

primary is copied to the secondary.

You may want to verify an array when you suspect there is a problem.

To verify an array:

From SAM, select

Manage X24 Subsystem > Disk Array Config > Verify Array

The Verify Array page displays with a list of existing arrays.

Select the array you want.

Click

Verify & Update Array Parity

Verification begins and the percentage of verification completed displays. You can continue to use the
array during verification.

To check the progress of the verification, select

Manage X24 Subsystem > Disk Array Config > Array

Utility Progress

or any item from the

Disk Array Config

menu. The status of the verification displays in

the list of arrays.

3.3.2.1

Stopping the Array Verification Process

You can stop the array verification process.

Note

If you stop the verification process, you cannot resume. You must restart from the beginning.

To stop the array verification process:

From SAM, select

Manage X24 Subsystem > Disk Array Config > Abort an Array Utility

The

Abort an Array Utility

page displays with a list of existing arrays.

Select the array you want.

Содержание RS-1600-X24

































































































































































































































































Результаты поиска

Содержание RS-1600-X24

Отзывы:

Похожие инструкции для RS-1600-X24

Бренды по названию

Популярные бренды

Impediment RS-1600-X24, Руководство пользователя

Результаты поиска

Содержание RS-1600-X24

Отзывы:

Похожие инструкции для RS-1600-X24

Бренды по названию

Популярные бренды