Impediment RS-1600-X24 Скачать руководство пользователя страница 175

Страница: 175 / 256

Monitoring System Status

157

Press

to page up or

to page down in the log or use the other keys as listed at the bottom of the screen

to navigate within the event log.

Keep pressing

CTRL-E

to page through the other information screens and return to the menu.

D.2.4 Capturing the Event Log

You can also capture a SM’s entire event log, which saves it to a file on your hard drive. This is useful if

you want to print the log or attach it to an e-mail message.

The steps below use HyperTerminal as the terminal emulator software. If you use a different terminal
emulator, your procedure may be different.

To capture the event log file:

With HyperTerminal up and running as your RS-232 interface terminal, press

CTRL-E

until the event log

displays.

From the Transfer menu in HyperTerminal, select Capture Text.
The Capture Text window displays.

Enter the path and file name you want to use to store the log file contents.

Save the file with a.txt file extension.

Click

Start

Press

on the keyboard to begin the transfer.

Содержание RS-1600-X24

































































































































































































































































Результаты поиска

Содержание RS-1600-X24

Отзывы:

Impediment RS-1600-X24, Руководство пользователя, Страница: 175 / 256

Результаты поиска

Содержание RS-1600-X24

Отзывы: