Impediment RS-1600-X24 Скачать руководство пользователя страница 234

Страница: 234 / 256

RS-1600-X24 User Guide

216

Changes to either of these settings on either SM module are automatically updated on the other SM

module.

To set the Telnet settings:

From the System Menu, select

Configuration

Menu

and press

Enter

The Configuration Menu displays.

Select

LAN Configuration

and press

Enter

The LAN Configuration screen displays.

Select

Telnet Settings

and press

Enter

The Telnet Settings screen displays.

Select the option you want and press

Enter

The screen displays related to the option you selected.

Enter or select the option you want and press

Enter

The system confirms that you want to make the change.

Select

Yes

and press

Enter

The system makes the change.

H.2.4 Configuring the SNMP Settings

You can set six Simple Network Management Protocol (SNMP)-related settings:

•

Trap Host

: Host computer’s IP address that is set up to receive SNMP traps. The default is 0.0.0.0.

•

Traps Enable

: On or off toggle to enable SNMP traps. The default is No (disabled).

•

Read Community

: SNMP read password. The default is Public.

•

Write Community

: SNMP write password. The default is Private.

•

Event Filter

: Informational, Warning, or Error. The default is Warning.

•

Trap Filte

r: Informational, Warning, or Error. The default is Warning.

Changes to any of these settings on either SM module are automatically updated on the other SM

module.

To set the SNMP settings:

From the System Menu, select

Configuration

Menu

and press

Enter

The Configuration Menu displays.

Select

LAN Configuration

and press

Enter

The LAN Configuration screen displays.

Содержание RS-1600-X24

































































































































































































































































Результаты поиска

Содержание RS-1600-X24

Отзывы:

Похожие инструкции для RS-1600-X24

Бренды по названию

Популярные бренды

Impediment RS-1600-X24, Руководство пользователя

Результаты поиска

Содержание RS-1600-X24

Отзывы:

Похожие инструкции для RS-1600-X24

Бренды по названию

Популярные бренды