background image

Managing Drives & Enclosures

175

To display all drives:

1

From the System Menu, select 

Display Drives

 and press 

Enter

.

The Display Drives screen displays. 

If a drive has an E in the first column, select the drive and press 

Enter

 to display the error.

To reset the error statistics, select 

Reset drive error statistics

 and press 

Enter

.

To blink the selected drive, press 

B

. The blink function is a toggle. Press 

B

 again to stop the blinking. You 

can also blink more than one drive by selecting each drive and pressing 

B

.

To toggle the display between the drive model number, serial number, and the node and WWN, press 

T

.

2

Press 

Esc

 to return to the System Menu.

F.1.1.2

Viewing Drive Status

You can view the status of the drives in an array, including the following information:

• Drive number: The drive’s sequential position in the X24 Subsystem’s drive list

• Drive status: Whether the drive is up or down

• Spare: Displays SPR if the drive is a dedicated spare for the current array

• Channel number: Back-end disk bus number

• Channel and Loop ID: ID for the I/O modules the drive is connected to and the loop ID for the FC 

disk port

Содержание RS-1600-X24

































































































































































































































































Отзывы: