manualshive.com logo in svg

Impediment RS-1600-X24, Руководство пользователя

Импедимент RS-1600-X24 - мощный процессор с 24 ядрами для улучшения производительности вашего устройства. Получите подробное руководство по эксплуатации бесплатно на нашем сайте. Скачать руководство с manualshive.com и наслаждаться высоким качеством звука без проблем.

Поделиться
Скачать
background image

RS-1600-X24 User Guide

226

SCSI port   

A SCSI port is an opening at the back of a router that provides connection between the SCSI 

adapter and SCSI bus.

Serial Transmission   

The transfer of data characters one bit at a time, sequentially, using a single 

electrical path. See 

Parallel Transmissio

n.

Simple Network Management Protocol (SNMP)    

SNMP is the Internet standard protocol, defined in 

STD 15, RFC 1157, developed to manage nodes on an Internet Protocol (IP) network. 

small computer system interface (SCSI)    

SCSI is an industry standard for connecting peripheral 

devices and their controllers to an initiator. Storage devices are daisy-chained together and connected to 
a host adapter. The host adapter provides a shared bus that attached peripherals use to pass data to and 

from the host system. Examples of devices attached to the adapter include disk drives, CD-ROM discs, 
optical disks, and tape drives. In theory, any SCSI device can be plugged into any SCSI controller. 

small form-factor pluggable (SFP)   

Type of connector.

speed   

Speed shows the speed of the FC port interface.

Storage Area Network (SAN)   

SAN refers to the network behind servers that links one or more servers 

to one or more storage systems. Each storage system could be RAID, tape backup, tape library, CD-

ROM library, or JBOD. SANs operate with both SCSI and networking (IP) protocols. Servers and 
workstations use the FC network for shared access to the same storage device or system. Legacy SCSI 
systems are interfaced using an FC-to-SCSI bridge.

Storage Manager module   

The controller module which includes an FC-AL 2Gb/s 

LRC I/O module 

with 

integral Xyratex X24 RAID controller.

target   

A target is a device (peripheral) that responds to an operation requested by an initiator (host 

system). Although peripherals are generally targets, a peripheral may be required to act temporarily as 
an initiator for some commands (for example, SCSI EXTENDED COPY command).

terminator block/termination   

A terminator block (or termination) refers to the electrical connection at 

each end of a SCSI bus. The terminator block is composed of a set of resistors, or possibly other 
components. The function of a terminator block is to provide a pull-up for open collector drivers on the 
bus, and also impedance matching to prevent signal reflections at the ends of the cable. SCSI buses 

require that a terminator be placed on the 68-pin high-density SCSI connector on the last SCSI 
peripheral. Data errors may occur in a SCSI bus that is not terminated. 

topology   

A network topology refers to the physical layout of nodes on a network. Topologies range from 

local network topologies to WAN topologies. FC topologies include point-to-point, FC-AL, and fabric. 

trap   

In the context of SNMP, a trap is an unsolicited message sent by an agent to a management 

station. The purpose is to notify the management station of some unusual event. 

unkill   

In Active-Active mode, when a surviving controller removes the reset from the other controller, it 

unkills it. The other controller will reboot and attempt to come online.

write-back cache   

Memory on the controller that stores data changes until they are written to the disk 

drives. In most applications, using the controller’s write-back cache improves performance and ensures 
data integrity. Disk drives also have write-back cache, which should be disabled for most applications. 

Содержание RS-1600-X24

































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RS-1600-X24

Ice-O-Matic B100 Service & Parts Manual preview
B100
Бренд: Ice-O-Matic Страницы: 9
OpenEye OE-GRANITE1U User Manual preview
OE-GRANITE1U
Бренд: OpenEye Страницы: 23
Transcend TS128MJF2A User Manual preview
TS128MJF2A
Бренд: Transcend Страницы: 25
Newpo GLWB173 Manual To Assembly & Usage preview
GLWB173
Бренд: Newpo Страницы: 5
ABSCO SHEDS 23151SK-PTX Manual preview
23151SK-PTX
Бренд: ABSCO SHEDS Страницы: 19
Aegis Secure Key 3.0 Quick Start Manual preview
Secure Key 3.0
Бренд: Aegis Страницы: 1
IBM N3240 Installation And Setup Instructions preview
N3240
Бренд: IBM Страницы: 24
IBM Storwize V5100 Series Quick Installation Manual preview
Storwize V5100 Series
Бренд: IBM Страницы: 130
IBM 6.1.8.2 Hardware Planning And Installation Manual preview
6.1.8.2
Бренд: IBM Страницы: 114
DataDirect Networks S2A9550 User Manual preview
S2A9550
Бренд: DataDirect Networks Страницы: 118
Fantec QB-X2US3R User Manual preview
QB-X2US3R
Бренд: Fantec Страницы: 23
Hoggar MALMO II User Manual preview
MALMO II
Бренд: Hoggar Страницы: 32
ELStorage SS-20WM User Manual preview
SS-20WM
Бренд: ELStorage Страницы: 3
Alpha ESS SMILE-B5 II Installation Manual preview
SMILE-B5 II
Бренд: Alpha ESS Страницы: 74
Heartland VALUE CLASSIC 16653-G Assembly Manual preview
VALUE CLASSIC 16653-G
Бренд: Heartland Страницы: 60
Cavalry CAUA Series User Manual preview
CAUA Series
Бренд: Cavalry Страницы: 16
Promise Technology Pegasus2 R4 Quick Start Manual preview
Pegasus2 R4
Бренд: Promise Technology Страницы: 1
Kimberley KRB40D Installation Instructions preview
KRB40D
Бренд: Kimberley Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды