Impediment RS-1600-X24 Скачать руководство пользователя страница 66

Страница: 66 / 256

RS-1600-X24 User Guide

5.11 Saving and Restoring a Configuration

File

You can save all of your X24 Subsystem configuration settings to a file and restore that file.

5.11.1 Saving a Configuration File

You can save all of your X24 Subsystem configuration settings to a file. This lets you make a backup of

your settings. The configuration file contains all X24 Subsystem configuration information including the
following settings:

• FC host port

• FC device port
• Enclosure management
• Options

• Disk
• LAN
• Audio alarm

• Passwords/security
• Remote notification

Important

It does not include any array or partition information.

To save a configuration file:

From SAM, select

Manage X24 Subsystem > Utilities > Configuration Utilities > Save Config File

The

Save Config File

page displays.

Click

Save Configuration File

to save the current X24 Subsystem configuration to a file on the host

system or anywhere on your network.
The

File Download

window displays.

Select

Save this file to disk

and click

The

Save As

window displays.

Navigate to where you want to save the file and enter the file name.

Click

Save

5.11.2 Restoring a Configuration File

You can restore a saved X24 Subsystem configuration file. This lets you revert back to previous settings

or “clone” one X24 Subsystem’s settings to another X24 Subsystem. You must use SAM to connect to
the X24 Subsystem where you want to restore the file.

To restore a configuration file:

From SAM, select

Manage X24 Subsystem > Utilities > Configuration Utilities > Restore Config File

The

Restore Config File

page displays.

Содержание RS-1600-X24

































































































































































































































































Результаты поиска

Содержание RS-1600-X24

Отзывы:

Impediment RS-1600-X24, Руководство пользователя, Страница: 66 / 256

Результаты поиска

Содержание RS-1600-X24

Отзывы: