Impediment RS-1600-X24 Скачать руководство пользователя страница 166

Страница: 166 / 256

RS-1600-X24 User Guide

148

The Add or Name Host screen displays the last 16 known WWNs and host nicknames that you have set

up. If you want to change the nickname, enter the new nickname in step

. For more information, see

C.3.8.1, ”Viewing Known WWNs”, on page 145

If the SM is not aware of any WWNs, the list is empty and the system asks you to enter a host WWN.

Select

Enter New Host

to enter a nickname for a new host

Select the WWN you want to name and press

Enter

The Enter Host Name screen displays.

Enter the nickname you want and press

Enter

You can enter up to 16 characters. You can use any combination of characters and spaces.

C.3.8.3

Configuring InfoShield

Once you set up host nicknames, you can easily set up your InfoShield. This is where you determine

which hosts can access each partition LUN.

You set up InfoShield by either excluding or including hosts on a list for each partition LUN. The list can

include or exclude up to 16 specific hosts or all hosts for each partition LUN.

The InfoShield information is stored as part of the array’s metadata using the WWN for each host. If you
install a new SM, the array partition’s InfoShield will remain. The InfoShield will also remain if you change

the partition’s LUN.

Note

Changes to InfoShield take effect immediately, therefore, you should make changes that limit access to
partitions when the partitions are not in use.

Содержание RS-1600-X24

































































































































































































































































Результаты поиска

Содержание RS-1600-X24

Отзывы:

Impediment RS-1600-X24, Руководство пользователя, Страница: 166 / 256

Результаты поиска

Содержание RS-1600-X24

Отзывы: