manualshive.com logo in svg

Impediment RS-1600-X24, Руководство пользователя, Страница: 208 / 256

Поделиться
Скачать
Impediment RS-1600-X24 Скачать руководство пользователя страница 208

RS-1600-X24 User Guide

190

G.1 Shutting Down and Restarting the 

Storage Manager Module

•

Shut down and restart the current SM module

: Gracefully shuts down and restarts the SM 

module you are currently accessing using the Disk Array Administrator software (as shown at the 
bottom of each screen). Use this option when you have changed a configuration that requires 

restarting (the procedures say when you need to do this) or when you need to replace the SM 
module. (See 

page 190

.)

•

Shut down the other SM module

: Gracefully shuts down the other SM module (the one you are 

not currently accessing using the Disk Array Administrator software). Use this option when you need 
to replace the other SM module or to perform maintenance. (See 

page 191

.)

•

Shut down both SM modules

: Gracefully shuts down both SM modules. Use this option when you 

need to power down the whole system for maintenance, repair, or a move. (See 

page 192

.)

G.1.1 Shutting Down and Restarting the Current SM Module

You may need to shut down and restart a SM module after making certain configuration changes. The 

procedures say when you need to do this.

You should shut down a SM module before you remove it. This shut down is the same as unlocking the 
handles on the SM module hardware to remove it. Using the shutdown from the Disk Array Administrator 

lets you see any messages related to the shut down. You cannot see the messages when you unlock the 
hardware handles.

You should shut down both SM modules when you need to power down the whole system for 

maintenance, repair, or a move. For more information, see 

G.1.3, ”Shutting Down Both SM Modules”, on 

page 192

.

We strongly recommend that you shut down a SM module gracefully and do not just turn off the power. 

A normal shutdown ensures that the write-back cache has been flushed to the disk.

To shut down and restart the current SM:

1

From the System Menu, select 

Shutdown Menu 

and press

 Enter 

The Shutdown Menu displays.

.

Содержание RS-1600-X24

































































































































































































































































Отзывы:

Нет отзывов