illumina Infinium HD Super Assay Скачать руководство пользователя страница 48

Страница: 48 / 79

Figure 5

Robot Setup for Fragment MSA1

FMS

MSA1 Plate

Place FMS tubes in the robot tube rack according to the bed map. Remove the cap mat.

At the robot PC, select Run.

When the process completes, select OK.

Remove the plate from the robot bed and seal with a cap mat.

Vortex at 1600 rpm for 1 minute.

Pulse centrifuge at 280 × g.

10 Place the sealed plate on the 37°C heat block for 1 hour.

If you are continuing, leave the plate in the 37°C heat block until you have completed preparation for the
next step. Do not leave the plate on the heat block for longer than 2 hours.

SAFE STOPPING POINT

If you are stopping, seal the plate(s), and store at -25°C to -15°C.

Precipitate DNA

This step uses 100% 2-propanol and PM1 to precipitate the DNA.

Consumables

100% 2-propanol

PM1(2 tubes)

Cap mat

Preparation

Do one of the following:

Document # 11322427 v03

For Research Use Only. Not for use in diagnostic procedures.

Infinium HD Super Assay Reference Guide

Содержание Infinium HD Super Assay
















































































Результаты поиска

Содержание Infinium HD Super Assay

Отзывы:

illumina Infinium HD Super Assay, Справочное руководство, Страница: 48 / 79

Результаты поиска

Содержание Infinium HD Super Assay

Отзывы: