illumina Infinium HD Super Assay Скачать руководство пользователя страница 47

Страница: 47 / 79

16 Centrifuge at 280 × g for 1 minute.

NOTE

Perform the remaining protocol steps in the post-amplification area.

Incubate DNA

This step uniformly amplifies the genomic DNA, generating a sufficient quantity of each individual DNA sample
to be used in the Infinium HD Super Assay.

NOTE

This and all remaining steps in the workflow are performed in the post-amp lab.

Incubate the MSA1 plate in the Illumina Hybridization Oven for 20–24 hours at 37°C.

Fragment DNA

This step enzymatically fragments the DNA. An endpoint fragmentation is used to prevent overfragmentation.

Consumables

FMS (2 tubes)

Cap mats

Preparation

Preheat the heat block with the midi plate insert at 37°C.

Prepare the following consumable.

Item

Storage

Instructions

FMS

-25°C to -15°C

Thaw to room temperature. Invert 10 times to mix.

Preheat the heat block with the midi plate insert at 37°C.

Remove the MSA1 plate from the Illumina Hybridization Oven.

If resuspending the MSA1 plate today, remove the RA1 from the freezer and thaw at room temperature.

Procedure

Pulse centrifuge the MSA1 plate at 280 × g.

At the robot PC, select MSA1 Tasks | Fragment MSA1.

Place the MSA1 plate on the robot bed according to the bed map. Remove the cap mat.

Document # 11322427 v03

For Research Use Only. Not for use in diagnostic procedures.

Infinium HD Super Assay Reference Guide

Содержание Infinium HD Super Assay
















































































Результаты поиска

Содержание Infinium HD Super Assay

Отзывы:

illumina Infinium HD Super Assay, Справочное руководство, Страница: 47 / 79

Результаты поиска

Содержание Infinium HD Super Assay

Отзывы: