Ikco DONG FENG H30 2016, Руководство пользователя

Страница: 82 / 166

81
1
LIGHT COMBINATION SWITCH AND HAZARD WARNING LAMP
Headlamp alarm
The high beam will be lighted after the
combination switch handle is lifted up
once in the direction of the steering
wheel plane and then off after the handle
is released. It can be still effective after
the ignition switch is disconnected.
Turn signal lamp switch
Press down the combination switch
handle to turn left.
Lift up the combination switch handle to
turn right.
During the steering, make the
combination switch handle overpass the
limit point in the designated direction,
and the turn signal lamp switch handle
will automatically reset along with the
alignment of steering wheel.
Lane change indicator lamp
When you want to change the lane,
slightly toggle the combination switch
handle:
To change to the left lane, slightly press
down the combination switch handle
but do not pass the limit point, and
the left turn signal indicator lamp will
automatically go out after flashing for
three times.
To change to the right lane, slightly lift
up the combination switch handle but do
not pass the limit, the right turn signal
indicator lamp will automatically go out
after fl ashing for three times.
Hazard warning switch
Press down this switch, and the left/right
turn signal indicator lamp and the turn
signal lamp will fl ash simultaneously.
The warning switch can be used
only in such dangerous conditions
as emergency parking and driving in
abnormal conditions.
The hazard warning switch can be still
effective even though the ignition switch
is disconnected.
If the hazard warning switch is
connected, the operation to the turn
signal lamp will be ineffective.