Ikco DONG FENG H30 2016, Руководство пользователя

Страница: 144 / 166

143
5
BULB REPLACEMENT
Rear combination lamp (H30)
Brake lamp & position lamp: P21/5W
Reversing lamp: P21W
Rear fog lamp: P21W
Turn signal lamp: PY21W
Additional brake lamp & position
lamp: LED
Open the liftgate and two small trim
covers inside of rear combination lamp,
remove two mounting bolts; pull out
the plug, and then remove the rear
combination lamp.
Brake lamp & position lamp
(P21/5W)
Turn the lamp holder counterclockwise
for 45° to remove the lamp holder and
bulb, press the bulb inward gently and
turn it counterclockwise, after removing
the bulb for replacement, reinstall it in
the reverse order. (Note: Insert the high
and low pins on both sides of lamp end
correspondingly into deep and shallow
notches of the lamp holder)
Reversing lamp (P21W)
Turn the lamp holder counterclockwise
for 45° to remove the lamp holder and
bulb, press the bulb inward gently and
turn it counterclockwise for removal.
After replacing the bulb, reinstall it in the
reverse order.
Rear fog lamp (P21W)
Turn the lamp holder counterclockwise
for 45° to remove the lamp holder and
bulb, press the bulb inward gently and
turn it counterclockwise for removal.
After replacing the bulb, reinstall it in the
reverse order.
Rear turn signal lamp (PY21W)
Turn the lamp holder counterclockwise
for 45° to remove the lamp holder and
bulb, press the bulb inward gently and
turn it counterclockwise for removal.
After replacing the bulb, reinstall it in the
reverse order.
Additional brake lamp & position
lamp (LED)
It is recommended to have the additional
position lamp and brake lamp assembly
replaced at Dongfeng Franchise Store
or IKCO authorized representatives.